Summarization
This controller is one of the basic product platform in our company, Controller should collocate with slave controller. It can achieve some functions such as jumpy changing, running water pattern, horse racing, gradual changing, stroboflash and so on, the specific change mode could be ordered according to the requirement of customer.
Technical parameters
Master controller technical parameters
● Working temperature: -20-60 ℃
● Supply voltage: DC12V
● Output: RS485 signal
●External dimension: L222 Χ W130 Χ H40 mm
● Packing size: L232ΧW180ΧH55mm
● Net weight: 760 g
● Gross weight: 830 g
Slave controller technical parameters
● Working temperature: -20-60 ℃
● Supply voltage: DC5V
● Output: two groups SPI signal,485 signal
● External dimension: L123 Χ W72 Χ H27 mm
● Packing size: L145 Χ W95 Χ H50 mm
● Net weight: 100 g
● Gross weight: 130 g
●Static power consumption: <1W
Direction for use
Master controller:
1. Adopt button control, and every button function as follows:
Mode: mode button, the pattern changes press once, there are 27 modes in all.
Para: parameter choice button.
Up: the chosen parameter increasing button.
Down: the chosen parameter decreasing button.
2. Parameter adjustment as following:
|
NO.
|
Parameters
|
Specifications
|
|
MAX
|
MIN
|
|
1
|
SPEED (running speed)
|
10
|
1
|
|
2
|
Slave Num (set up Slave number)
|
200
|
1
|
3. Standard color changes as follows:
|
NO.
|
Modes
|
Functions
|
Remarks
|
|
1
|
1_Red
|
Static red
|
|
|
2
|
2_Green
|
Static green
|
|
|
3
|
3_Yellow
|
Static yellow
|
|
|
4
|
4_Blue
|
Static blue
|
|
|
5
|
5_Purple
|
Static purple
|
|
|
6
|
6_Cyan
|
Static cyan
|
|
|
7
|
7_White
|
Static white
|
|
|
8
|
8_Jump_7
|
Seven-color jumpy changing
|
|
|
9
|
9_Gradual_7
|
Seven-color gradual changing
|
|
|
10
|
10_ Jump_3
|
Three-color jumpy changing
|
|
|
11
|
11_Horse_L1
|
Red horse race lamp to left
|
|
|
12
|
12_Horse_R1
|
Green horse race lamp to right
|
|
|
13
|
13_Horse_L2
|
Blue horse race lamp to left
|
|
|
14
|
14_Horse_R2
|
White horse race lamp to right
|
|
|
15
|
15_ Glitter
|
Seven-color stroboflash
|
|
|
16
|
16_R_flash
|
Red stroboflash
|
|
|
17
|
17_G_flash
|
Green stroboflash
|
|
|
18
|
18_B_flash
|
Blue stroboflash
|
|
|
19
|
19_Flow_L
|
Seven-color running from left to right
|
|
|
20
|
20_Flow_L7
|
Seven-color running after from left to right
|
|
|
21
|
21_Flow3_L
|
Three-color running after from left to right
|
|
|
22
|
22_Flow33_L
|
RGB right running form
|
|
|
23
|
23_ AllColorWave
|
All color wave from left to right
|
|
|
24
|
24_Tail7_L
|
Seven-color tail after from left to right
|
|
|
25
|
25_Ponit7_R
|
Seven-color running after from right to left
|
|
|
26
|
26_ 26_Tail3_L
|
Three-color tail after from left to right
|
|
|
27
|
27_ Autoplay
|
Automation
|
Automatic mode cycle from 1 to 26
|
Slave controller:
1. When the slave controller used with the master controller, the change mode controlled by the master controller.
When the slave used alone, it adopts button control, every button function as follows:
ON/OFF button, it can open or close led anytime;
Play/pause button, can display or pause led change, in order to observe the static effect of led .
Adding button, changing speed increase button;
Reducing button, changing speed decrease button, there are 100 speed levels in all.
Program choose button，down direction;
Program choose button, up direction, there are 27 programs in all.
2. Connect the load wire at first, following connect the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
3. Signal output interface direction: L,C,D,S,G mean LATCH,CLOCK,DATA,SPEED,GND respectively.
485 signal input and output;
4. The controller signal output wire and input wire should be connected correctly.
